Façade Connection Systems

Accessories

ACCESSORIES

JORDAHL® angled brackets JW

JORDAHL® angled brackets JW

JORDAHL® angled brackets JW can be used as struts above openings and put on the side walls. Furthermore, they can be loosely placed on the support plate of the bracket as intermediate angle brackets for single brackets JVA+N/NA/NU or grout-in brackets JMK +N/+NA/+NU

Material

Available in stainless steel (corrosion resistance class III)
JORDAHL® permanent scaffold anchor JGA + Q/Z

JORDAHL® permanent scaffold anchor JGA + Q/Z

Scaffold anchors facilitate fastening of work platforms on finished structures without damaging the brickwork. They are attached to the supporting structure with dowels through the brick facade. Free-standing scaffoldings can be fastened to scaffold anchors.

  • Type JGA+ Z: for the transfer of forces perpendicular to the external wall
  • Type JGA+ Q: for the transfer of loads parallel and perpendicular to the external wall
  • Including: grey plastic cap
  • Also available: dowels for fastening in concrete, scaffolding eyelets (electro zinc plated)

Material

Available in stainless steel with corrosion resistance class III.
JORDAHL® cavity wall anchors JLA

JORDAHL® cavity wall anchors JLA

JORDAHL® cavity wall anchors secure the brickwork against deflection and transfer the horizontal wind forces to the supporting structural components.

  • Cavity wall anchor L-shaped: for double-shell brickworks with or without thermal insulation.
  • Dowel anchors: Pre-assembled cavity wall anchor for subsequent facing of brickwork walls made of solid brick or concrete walls.
  • Water barrier disc, insulation holder with grip-nose and ISO-Clip are attached to the cavity wall anchors after the thermal insulation has been applied

Material

Available in stainless steel (A4).
JORDAHL® suspension loop JRH

JORDAHL® suspension loop JRH

JORDAHL® suspension loops and the associated longitudinal reinforcement are suitable for bridging openings with courses of stretchers or headers.

  • JRH 0: for brick layer thickness 115 mm and JVA+ N console
  • JRH 11: for brick layer thickness 115 mm
  • JRH 24: for brick layer thickness 240 mm

Material

Available in stainless steel with corrosion resistance class III.
JORDAHL® brick tie anchors JMA

JORDAHL® brick tie anchors JMA

JORDAHL® brick tie channels and the associated brick tie anchors ensure durable and reliable connection of the brickwork to adjacent components.
The brick ties are set into the brick tie channels and pressed into the joint mortar of the brickwork.

  • Brick tie anchors JMA,
  • Transverse brick tie anchor JMA-Q T-shaped,
  • Transverse brick tie anchor JMA-QE L-shaped,
  • Thin-bed brick tie anchors JMA-D,
  • Connecting straps, smooth or serrated

Material

Available in stainless steel and hot-dip galvanised steel
JORDAHL® Toothed Locking Plate JXS

JORDAHL® Toothed Locking Plate JXS

The JORDAHL® Toothed Locking Plate JXS is part of the JBA Set, but can also be ordered separately. The plate interlocks with the serrated slot in the bearing plate of the Support Corbel JBA. This provides a secure resistance to wind loads, and horizontal installation tolerance.

Material

Available in A4 stainless steel.
JORDAHL® Horseshoe Shim JVS

JORDAHL® Horseshoe Shim JVS

The JORDAHL® Horseshoe Shim JVS is part of the JBA Set, but can also be ordered separately. It is used for shimming and allows the Support Corbel JBA to be vertically adjusted on the bearing plate. The slot in the shim allows easy assembly and disassembly.

Material

Available in A4 stainless steel.
JORDAHL® Square Bearing Plate JVL

JORDAHL® Square Bearing Plate JVL

The JORDAHL® Square Bearing Plate JVL is part of the JBA Set, but can also be ordered separately. It is used with frontal Levelling Pin JGW and allows the Support Corbel JBA to be vertically adjusted.

Material

Available in A4 stainless steel.
JORDAHL® Levelling Pin JGW

JORDAHL® Levelling Pin JGW

The JORDAHL® Levelling Pin JGW is part of the JBA Set, but can also be ordered separately. Levelling Pin JGW is used with Square Bearing Plate JVL for frontal vertical adjustment of Support Corbel JBA.

Material

Available in A4 stainless steel.